Glute Ham Developers

We offer several U.S.A Made Glute Ham Developers made by Rogue as well as Sorinex and Legend.

Legend Fitness makes all of their Glute Ham Developers to order, which allows you to customize the color of the frame and pads. 

They offer 3 different levels.

The Legend Econ GHD ships unassembled to save on shipping cost, but is still rock solid. It comes standard with a split pad. 

The Legend Standard GHD is made from 11 gauge 3×3″ tubing and is a fully welded design, for maximum stability. It adds band pegs and also comes standard with a split pad.

The Legend Pro Series GHD, incorporates larger, 32″ wide, foot pads and a foot plate of the same width. It is even heavier for more stability. It has 8 linear adjustments on 4 linear bearings. It has 2 band pegs per side to further increase functionality. 

Sorinex is one of the most respected and most experienced GHD manufacturers in the market and they now offer a GHD specifically aimed at the CrossFit market.

The Sorinex GHD-M2 is the new version of the FN-GHD that was used at the 2010 CrossFit Games. It is an incredibly stable GHD that ships unassembled to save on shipping cost. It incorporates a unique foot plate adjustment mechanism. While it does not have the ability to move the foot pads up or down, the shorter upright makes it easier to move the foot pads forward and backwards.

The GH-1 Rogue Abram GHD is the product of years of research and planning. It is rock solid piece of machinery made from 2×3 steel tubing.  It ships unassembled to save on shipping cost, but is as solid as any welded design out there. The frame is made from 2×3″ steel, making it inherently stable and it has 2 set screws on the adjustment for the upright, set at 90 degree angles to completely eliminate motion when using the GHD. It has  wheels for portability as well as holes for our band pegs.

This entry was posted in Made In USA, Rogue Store, Tips. Bookmark the permalink.

Comments are closed.