Category Archives: How To:

Bar Shopping

www.roguefitness.com is now the best place in the world to shop for a new bar. Not only can you be sure that any bar that you buy from our site will be top quality, it is now much easier to choose a bar to perfectly fit your needs.

We have a huge selection of bars, ranging from needle bearing Olympic weightlifting bars, to men’s and women’s multipurpose bars. We also have bars ranging from powerlifting bars to junior and technique bars and even specialty bars, as well as everything in between with the tools and knowledge that will enable you to pick the bar that is perfect for your application.

If you are looking for a certain brand, an intended use, a feature, a shaft diameter, a knurling texture, a construction method, a specific tensile strength, a coating, or even a certain color, it has never been easier to find what you are looking for.

Whether you are looking for a men’s weightlifting bar, a women’s bar or need something more specific like a 28 MM bar with bushings and no center knurl or 29 MM bar made from 185K PSI steel with powerlifting knurl markings finding what you need is as easy as picking from the categories on the left side of the page. Keep choosing categories to narrow down the choices until you have found exactly the bar you are looking for.

Check out our Bars Page to try it out.

Posted in FAQ, How To:, Rogue Store, Tips | Leave a comment

Rogue Pullup Systems

Often it can be difficult to find a decent place to do pullups whether you workout in a home gym or own your own commercial facility. Most of the off the shelf products just do not place the bar far enough from the wall to kip properly and do movements like bar muscle-ups.

The Rogue P-3 and P-4 pullup systems offer an easy to install, but incredibly sturdy brackets that can be used to make anything from single pullup bars in a garage to a wall length pull-up bar in a gym.

Here is a video that shows how easy they are to install:

Posted in General, How To:, Made In USA, Rogue Store | Leave a comment

How To: Assemble The Rogue S-1 Squat Rack

Adam from Rogue Fitness. Today we are going to show you how to assemble an S1. When you get your S1 you are going to get your base box, you’re going to get your cross members, your J-Cups, kit hardware, two washer plates, and your seventy-inch uprights.

The squat rack is one of the most important tools in the garage gym. Here is a great video that shows how to assemble your S-1 Rogue squat rack. Everything is included and easy to construct. It’s designed and manufactured in the USA. For more information, visit theĀ S-1 page.

 

Posted in How To: | Leave a comment