How do the 10-15LB Rogue HiTemps stack up?

From Rogue Bumpers

We have 10’s & 15’s that are getting dropped overhead almost every 3 seconds, that is our Rogue approximation. We currently sell Rogue HiTemp bumpers only and they are made with the following:

1) Recycled rubber

2) HD Stainless steel insert as see above. The insert is recessed so that it doesn’t catch the edge of the bumper next to it

The Rogue 10-15LB Bumpers are very inexpensive and will last a very long time. At $30/pair of 10’s or $45/pair of 15’s they are very affordable. They are also made in the USA! Nothing lasts forever but compared to a brass insert that may get deformed and/or fall out they are the most durable out there. The fact that the sleeve is recessed is a very big deal, the brass type are flush with the surface which subjects them to more damage.

These bumpers are not made to look nice enough for the World Championship but they will perform well enough for any Olympic training center around. The thicknesses are characteristic of a training plate hence they are wider than competition plates. A nice comp plate will set you back approximately $200/pair.

From Rogue Bumpers

10LB Plate on left and 15LB Plate is on the right.

This is a very cost-effective way to train the Olympic lifts.

Here are some general updates:

1) The Rogue Bumper Sets are ready to ship, our bumpers are made in the US by a guy named Chuck!

2) We just added products by Iron Maven – If you don’t know who that is, check out her site. Check out her videos on YouTube as well!

3) We tripled our manufacturing capacity on the Rogue Rings! They are in stock and will ship within 24 hours!

4) The Rogue Do Win’s are in stock finally but Do Win decided to leave out the 8.5 – 9 Sizes. We have an expedited order for those!

5) The Legend Econ GHD’s are in stock and ship within 24 hours!

6) The Sorinex GHD will be here tomorrow & BaseFit units are in stock!

7) Check out the Scratch & Dent page!

This entry was posted in News. Bookmark the permalink.